Uponor Q&E tap elbow PL

Made of brass. Note: Uponor Q&E Ring must be ordered separately!

Uponor Q&E tap elbow PL

Made of brass, for on wall installation or attachment with rotation protection to the mounting angles and plates. Female thread acc. to DIN EN 10226-1.
Note: Uponor Q&E Ring must be ordered separa ...

Uponor Q&E U-tap elbow

Made of brass, for on wall installation or attachment with rotation protection to the mounting angles and plates. Female thread acc. to DIN EN 10226-1.
Note: Uponor Q&E Rings must be ordered separ ...

Uponor tap elbow mounting angle

For the installation of Uponor press tap connection elbow MLC/Q&E. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes an ...

Uponor tap elbow mounting plate

For the installation of Uponor press tap connection elbow MLC/Q&E. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes an ...

Uponor tap elbow mounting angle

For the installation of Uponor press tap connection elbow MLC/Q&E. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes an ...

Uponor tap elbow single mount angle

For the installation of Uponor press tap connection elbow MLC/Q&E. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes an ...

Uponor tap elbow mounting rack

For the installation of Uponor press tap connection elbow MLC/Q&E. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes an ...

Uponor tap elbow mounting angle GEMINI

For the installation of Uponor end elbow, end elbow twin and end elbow U-profile. Positioning of the connections in the given raster. Screws M6x10 acc. DIN 965 included. With threated holes for easy a ...

Uponor tap elbow waste connection

Waste waster connection set for mounting plates and angles. Contains of PE-HD waste water elbow DN 50, lip seal and fixing accessories.

Uponor tap elbow sound protect set

Suitable for installation to Uponor press tap connection elbows MLC/Q&E 16-1/2FT, 18-1/2FT and 20-1/2FT. Made of EPDM. Sound protection acc. DIN 4109.

Uponor U-tap elbow sound protection

Suitable for installation to one Uponor end elbow U-profile. Made of EPDM. Pin and screws M 6x12 acc. DIN 965 included. Sound protection acc. DIN 4109.

Uponor pins+screws for mounting rack

Pins and screws for mounting plates, angles and tracks.

Uponor Q&E tap elbow lugged DR

Made of brass. Note: Uponor Q&E Ring must be ordered separately!

Uponor Q&E tap elbow termination box UP PL

Made of brass. Fits to termination box #1008845. Note: Uponor Q&E Ring must be ordered separately!

Uponor Q&E tap elbow termination box SP PL

Made of brass. Fits to termination box #1038470. Note: Uponor Q&E Ring must be ordered separately!

Uponor Q&E termination box, empty SP

Made of plastic for tap elbow.

Uponor Q&E termination box, empty ME

Made of plastic for PPSU elbow # 1042334
Note: PPSU elbow and Q&E ring must be ordered separately

Uponor compression adapter plated PEX

Made of plated brass, for connection of Uponor PE-Xa pipes to manifolds. Female thread 3/4" eurocone acc. to DIN EN ISO 228-1.