Uponor Comfort Pipe PLUS

PE-Xa pipe with an oxygen diffusion layer of EVOH (ethylene vinyl alcohol), with an extra outer protection layer in white colour with two blue stripes. Complying with EN ISO 15875 “Plastic piping syst ...

Uponor Comfort Pipe PLUS

PE-Xa pipe with an oxygen diffusion layer of EVOH (ethylene vinyl alcohol), with an extra outer protection layer in white colour with two blue stripes. Complying with EN ISO 15875 “Plastic piping syst ...

Uponor Q&E coupling PPSU

Note: Uponor Q&E rings must be ordered separately!

Uponor Fit compression adapter male

Compression adapter for connection of Uponor PE-Xa pipes with 3/4" female thread.
Material: Brass

Uponor Q&E adapter male thread PL

Made of brass. Male thread acc.to DIN EN 10226-1 for sealing in. Note: Uponor Q&E Ring must be ordered separately!

Uponor Q&E adapter female thread PL

Made of brass. Female thread acc. to DIN EN 10226-1. Note: Uponor Q&E Ring must be ordered separately!

Uponor Q&E ring with stop edge natural

Made of PE-X. Uponor Q&E rings natural intended for Uponor Q&E fittings.

Uponor Multi clamp track U-profile

For fixation of PE-Xa pipes.

Uponor Magna clamp track nail

For fastening the Uponor clamp track 25

Uponor Magna clip, steel mesh

For fastening Uponor pipes on reinforcement steel meshes.

Uponor Multi cable ties

For fastening pipes on reinforcement steel meshed.
Made of polyamide.

Uponor Classic tying wire

For fastening Uponor pipes on reinforcement steel meshes. Made of steel.
250 pcs per bag.

Uponor Fix bend support plastic

Made of impact resistant plastic as bend support 90° bends in the manifold area.

Uponor conduit

Corrugated, fire classification E conforming to DIN EN 13501.1. Supplied in coils.

Uponor Magna manifold segment w. valve

as supply / return for Industrialheating, made of:
- supply-segment, with control valves for preadjustment, heating loop connection for PE-Xa Pipe 25x2,3 with compression adapter.
- return-seg ...

Uponor Magna manifold segment w. valve

as supply / return for Industrialheating, made of:
- supply-segment, with control valves for preadjustment, heating loop connection for G3/4 eurocone.
- return-segment with thermostat upper se ...

Uponor Magna manifold kit

for mounting the manifold, made of:
- 2 St. brackets short
- 2 St. brackets long
- 2 St. filling valve brass
- 2 St. thermometer 0 - 60°C
- 1 St. manometer
- 2 St. endcap
- ...

Uponor Magna manifold bracket kit

for mounting the manifold, made of:
- 2 St. brackets short
- 2 St. brackets long
- 1 St. mounting material:
8x screws 6x60mm
8x plastic anchor
8x40mm

Uponor Magna manifold flowmeter

For adjusting the water quantity of the individual heating loops in a range of 4 -20 l/min. Water quantity is indicated in the inspection window. With shut-off function. Made of fibre-glass reinforced ...

Uponor Magna ball valve , set

for use with the Uponor Magna manifold
connection:
- G 11/2 FT
- G 11/2 MT
Material: brass