Uponor IQ storm water pipes have an internal size of 110-2500 mm, which means that you obtain the flow capacity requested. Range
We have the market's most complete range of fittings and chambers, and can also produce special solutions on demand. Installation
Thanks to a trumpet-shaped sleeve, the pipes are easy to assemble, saving time and money during installation. An optimised pipe profile means that as a rule you can recharge with existing aggregates, which also means a cost saving. Maintenance
The inline socketed pipe reduces the number of joints by 50%, which also reduces the risk of root penetration. The grey inner layer meets the standards and facilitates future inspection and filming. Quality
Uponor’s IQ storm water pipe meets all EN-13476 requirements regarding bending, strain, and watertightness up to a size of 800 mm and is certified with the Nordic Poly Mark (the largest sizes are made in accordance with the factory default as there is no possibility for external certification today). The pipe has a ring stiffness of SN8 and can be advantageously installed in areas where there is heavy traffic, such as motorways and railways. We take responsibility for a sustainable future
Uponor IQ pipes are manufactured using modern technology in combination with PP material that provides an optimum solution that has both a long service life and very high impact resistance. The same material (PP) in both the pipe and socket facilitates future recycling.
Welded joints have the same watertightness and strength as the pipe. Extruded welded joints are recommended for Weholite pipes. Splicing can be done with hand extruders or with automated welding equipment. Equipment is available for both external and internal welding of the pipe. Flanged connection
Flanged connections can be used for the following types of joint:
- Joints that must retain the ability to be dismantled
- Joints that have to be made underwater
- For connections to other types of pipe
The unique thread coupling on Weholite pipes can be used if a joint with a specific longitudinal tensile strength is required, e.g. for relining. Standard joints are sand-resistant but not watertight. Thread couplings are available in pipe sizes 400-1800 mm. Weholitesleeve
There are options to join the Weholite pipe to a sleeve with a rubber ring in sizes 400-1000mm. FlexSeal
Another joint method is FlexSeal, which is a stainless steel rubber-sealed metallic sweep that is rapid to implement and provides a watertight joint.